You are currently here:

 

CAT BACK EXHAUST SYSTEMS-

Mitsubishi Evo 7,8&9

 for when you're serious about  

                    

  

ProductsShopping CartFAQPhilosophyContact Us!Site MapPrivacy Policy

              

 

 

 

 

 

     

All Stainless Steel, FULL EXHAUST SYSTEMS-

Mitsubishi- EVO 7, 8 & 9

 

Download current pricelist for EVO 7,8 & 9, click here.

 

We manufacture using gr304 stainless steel tube and flanges, tube diameter is 3", C.N.C mandrel bent, all flanges are laser cut then tig welded. This system was developed after countless hours, the large diameter header pipe we developed mounts up to either the original cast dump pipe, or to our high flow cast dump pipe, we supply a larger gasket to create a flexible joint at this point. our unique large diameter mounting flange bolts to either cast dump pipe, the system utilises the original catalytic converter ( as the standard has a very high flow capacity) minimal bend angles ensure a good gas flow producing good HP with a deep exhaust note.

 

                                      

 
   

Part No.

PRICE (AUD)*

FULL SYSTEM round Ti tip muffler or s/s tip muffler

uses original converter

FSMEO

1790.00

FULL SYSTEM round Ti tip muffler or s/s tip muffler, with cast dump pipe

uses original converter

FSMEOC 

2400.00

FULL SYSTEM round Ti tip muffler or s/s tip muffler

uses substrate converter

FSMEM 

2425.00

FULL SYSTEM round Ti tip muffler or s/s tip muffler, with cast dump pipe

uses substrate converter

FSMEMC 

2900.00

 

  

 

CAST DUMP PIPE-Mitsubishi Evo

 

 

PART NO. : MECDP                 PRICE (AUD)*: 650.00          

 

 

 

Our unique high flow cast dump pipe gives a 44% increase in cross sectional area over original and was developed after countless hours of research and development and discussions with various people in the performance industry , it accepts the original heat shields and O2 senser, it accept our 3" header pipe and allows for spring loaded mounting as per original.

 

 

HEADER PIPE - MITSUBISHI EVO

 

Our unique header pipe bolts directly to the original cast dump pipe, or to our cast dump pipe and has a 3" diameter entry, the shape and design still allows for the header pipe to be spring tensioned (as per original) so that engine and exhaust can move independently of each other thus preventing fatigue. It bolts directly to the original cat and mounting rubbers, there is no need for spacers under the cross members.

 

 

PART NO. : MEHP                     PRICE (AUD)*: 420.00           

 

 

  

 

 

METALLIC SUBSTATE CONVERTER - MITSUBISHI EVO

 

Designed for the serious performance upgrade, strongly recommended for vehicles where over 200kw are trying to be achieved. It is all 304 stainless steel construction, polished. see universal converters for details

 

 

PART NO. : MEMSC                  PRICE (AUD)*: 650.00             

 

 

 

  

 

 

CAT REPLACEMENT PIPE (optional extra) - MITSUBISHI EVO

 

This tube replaces the original catalytic converter for straight through race only applications.  

 

 

 

PART NO. : MECRP                   PRICE (AUD)*: 285.00               

 

 

 

  

  

 

 

MID PIPE - MITSUBISHI EVO  

 

This pipe is constructed of 304 stainless steel is made to bolt directly to the original catalytic converter, it comprises of a resonator muffler which is 3" diameter straight through, to help create a deep smooth exhaust note.

 

 

PART NO. : MEMP                        PRICE (AUD)*: 510.00       

 

 

  

 

 

REAR MUFFLER - MITSUBISHI EVO

 

The pipe work leading to the muffler, and the perforated tube of the muffler is 3" diameter stainless steel, minimal bend angles ensure a good flow of the exhaust gases, the muffler body is polished 304 stainless steel with a 4 1/2" titanium tip fitted.

 

 

 

PART NO. : MERM                     PRICE (AUD)*: 900.00              

 

   

  

  

 

FULL SYSTEM FITTED - MITSUBISHI EVO 9

 

Picture shows the header pipe, and mid pipe bolted to the original catalytic converter (note: meader pipe uses the original mounting system).

 

 

 

 

 

  

 

 

FULL SYSTEM FITTED - MITSUBISHI EVO 9

 

 

Picture shows the down pipe fitted ( note: does not have to use spacers to lower cross members ).

 

 

 

  

 

DYNO CHART - MITSUBISHI EVO 9

Please click on the image (right) for an enlarged picture.

Measured at the wheels / 151kw std to 175kw

 

 

 

                                

Recent Updates

 

Home

 

Feature Cars

 

Sounds

 

Testimonials

 

Research &

Development

 

Fitting

Instructions

 

Wallpapers

 

Gallery

 

SEMA Gallery

 

SMB Ads

 

SMB Logos

 

SMB News

 

Merchandise

 

Links

                                      

                                                    

                                                                                      

                
 

*: Prices in AUD are GST inclusive. Prices in USD are indications only. Please refer to the instructions on shopping cart.

 Copyright 2014 all rights reserved

Note:  This website is best seen at screen resolution 1280 by 1024 pixels